Table of Contents
Advertisement
I-4 Command Interpreter
Chart I-1
Sys Commands
clear
display
load
mail
317517-A Rev 00
COMMAND
upnp [0:none/1:log]
urlblocked
[0:none/1:log/2:alert/3:b
oth]
urlforward [0:none/1:log]
[access|attack|error|ipse
c|ike|javablocked|mten|ur
lblocked|urlfor
ward]
alertAddr [mail address]
clearlog [0:no/1:yes]
display
logAddr [mail address]
schedule display
schedule hour [0-23]
schedule minute [0-59]
schedule policy
[0:full/1:hourly/2:daily/
3:weekly/4:none]
schedule week
[0:sun/1:mon/2:tue/3:wed/
4:thu/5:fri/6:sat]
DESCRIPTION
Records the UPnP logs.
Records and/or sends alerts for web
access blocked logs.
Records web access forward logs.
Clears the log.
Displays all logs or specified
categories of logs.
Loads the log settings buffer. Use
this command before you configure
the log settings. Use sys logs
save after you configure the log
settings.
Send alerts to this e-mail address.
Displays the logs and alerts mail
settings.
Send logs to this e-mail address.
Displays the mail schedule.
Sets the hour to send logs.
Sets the minute to send the logs.
Sets the mail schedule policy.
Sets the day of the wee for sending
weekly logs.
Advertisement
Table of Contents
