Nortel Contivity 221 User Manual page 526

Chart I-5
IPSec Commands
COMMAND
swSkipOverlap <on|off>
timer
chk_input
chk_my_ip
chk_conn.
update_peer
updatePeerIp
dial <rule #>
display <rule #>
load <rule #>
save
config netbios
name
keepAlive
lcIdType
Turn this on to have the device allow rules with
overlapping source and destination IP
addresses.
Sets the timer for checking if the WAN IP in
the menu has changed. The interval is in
seconds (10 default) and 0 is not a valid value.
Sets the idle timeout for IPSec connections. The
system disconnects an IPSec connection with
no traffic for the timeout period. The interval is
in minutes (2 default) and 0 means the
connection never times out.
Sets the auto-timer for updating IPSec
rules that use a domain name as the
secure gateway IP address. The interval is
in minutes (30 default) and 0 means it
never updates.
Forces the system to immediately update IPSec
rules which use a domain name as the secure
gateway IP address.
Initiates a VPN connection attempt using the
specified rule.
Displays the specified IPSec rule.
Loads an IPSec rule.
Saves IPSec rules.
active <on|off> Sets the NetBIOS active flag.
group <group index1, Sets the NetBIOS group.
group index2...>
<string> Sets a rule's name.
<Yes| No> Enables/disables keep alive.
<0:IP | 1:DNS | 2:Email> Sets the local ID type.
Command Interpreter I-17
DESCRIPTION
Contivity 221 VPN Switch User's Guide