Chapter 31
System Maintenance Menus 8 to 10
Command Interpreter Mode
31.1
The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of the
same functionality as the SMT, while adding some low-level setup and diagnostic functions.
Enter the CI from the SMT by selecting menu 24.8. Access can be by Telnet or by a serial
connection to the console port, although some commands are only available with a serial
connection. See the included disk or nortelnetworks.com for more detailed information on CI
commands. Enter 8 from Menu 24 - System Maintenance.
Use of undocumented commands or misconfiguration can damage the unit and
Figure 31-1 Command Mode in Menu 24
This chapter leads you through SMT menus 24.8 to 24.10.
possibly render it unusable.
Menu 24 - System Maintenance
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Firmware Update
8.
Command Interpreter Mode
9.
Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Contivity 221 VPN Switch User's Guide
31-1