Table of Contents
Advertisement
I-14 Command Interpreter
Chart I-4
IP Commands
robustness
status
IPSec Commands
The following chart lists and describes the ipsec commands. Each of these
commands must be preceded by ipsec when you use them. For example, type
ipsec display 3 to display the third IPSec rule if you have it configured.
Chart I-5
IPSec Commands
COMMAND
adjTcpMss
<off|auto|user
defined value>
contivityDial
contivityDrop
contivityState
317517-A Rev 00
COMMAND
<iface> leave
<group>
<iface> query
<iface> rsptime
[time]
<iface> start
<iface> stop
<iface> ttl
<threshold>
<iface> v1compat
[on|off]
<num>
DESCRIPTION
Removes an interface from a group.
Sends an IGMP query on the specified
interface.
Sets the IGMP response time.
Turns on IGMP on the specified
interface.
Turns off IGMP on the specified
interface.
Sets the IGMP Time To Live threshold.
Turns on/off IGMP version 1
compatibility on the specified interface.
Sets the IGMP robustness variable.
Displays the IGMP status.
DESCRIPTION
Sets the adjust TCP Maximum Segment Size.
Initiates the Contivity Client VPN connection.
Ends the Contivity Client VPN connection.
Displays information about the Contivity Client
VPN connection.
Advertisement
Table of Contents
