Description (Aaa) - Cisco NCS 5000 Series Manual

Authentication, Authorization, and Accounting Commands

description (AAA)

To create a description of a task group or user group during configuration, use the description command in
task group configuration or user group configuration mode. To delete a task group description or user group
description, use the no form of this command.
description string
no description
Syntax Description
string
Command Default
None
Command Modes
Task group configuration
User group configuration
Command History
Release
Release 6.0
Usage Guidelines
Use the description command inside the task or user group configuration submode to define a description
for the task or user group, respectively.
Task ID
Task ID
aaa
Examples The following example shows the creation of a task group description:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# taskgroup alpha
RP/0/RP0/CPU0:router(config-tg)# description this is a sample taskgroup
The following example shows the creation of a user group description:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# usergroup alpha
RP/0/RP0/CPU0:router(config-ug)# description this is a sample user group
Character string describing the task group or user group.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
description (AAA)
Modification
This command was introduced.
27