Show Ssh - Cisco NCS 5000 Series Manual

Secure Shell Commands

show ssh

To display all incoming and outgoing connections to the router, use the show ssh command.
show ssh
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
XR EXEC mode
Command History
Release
Release 6.0
Usage Guidelines
Use the show ssh command to display all incoming and outgoing Secure Shell (SSH) Version 1 (SSHv1) and
SSH Version 2 (SSHv2) connections.
Task ID
Task ID
crypto
Examples This is sample output from the show ssh command when SSH is enabled:
RP/0/RP0/CPU0:router# show ssh
SSH version : Cisco-2.0
id
---------------------------------------------------------------------------------------------------------------
Incoming sessions
Outgoing sessions
1
2
The following output is applicable for the show ssh command starting IOS-XR 6.0 releases and later.
RP/0/RP0/CPU0:router# show ssh
SSH version : Cisco-2.0
pty location state
0/3/CPU0 SESSION_OPEN
0/3/CPU0 SESSION_OPEN
Operations
read
userid host
lab 12.22.57.
lab 12.22.57.75
System Security Command Reference for Cisco NCS 5000 Series Routers
show ssh
Modification
This command was introduced.
ver authentication
v2 password
v2 keyboard-interactive
159