Aaa Accounting - Cisco NCS 5000 Series Manual

aaa accounting

aaa accounting
To create a method list for accounting, use the aaa accounting command in the XR EXEC mode. To remove
a list name from the system, use the no form of this command.
aaa accounting {commands| exec| mobile | network | system } {default| list-name} {start-stop| stop-only}
{none| method}
no aaa accounting {commands| exec| mobile | network} {default| list-name}
Syntax Description
commands
exec
mobile
network
system
event manager
default
list-name
start-stop
stop-only
none
method
System Security Command Reference for Cisco NCS 5000 Series Routers
4
Enables accounting for XR EXEC shell commands.
Enables accounting of a XR EXEC session.
Enables Mobile IP related accounting events.
Enables accounting for all network-related service requests, such as Internet Key
Exchange (IKE) and Point-to-Point Protocol (PPP).
Enables accounting for all system-related events.
Sets the authorization list for XR EXEC.
Uses the listed accounting methods that follow this keyword as the default list of
methods for accounting services.
Character string used to name the accounting method list.
Sends a "start accounting" notice at the beginning of a process and a "stop
accounting" notice at the end of a process. The requested user process begins
regardless of whether the "start accounting" notice was received by the accounting
server.
Sends a "stop accounting" notice at the end of the requested user process.
Note: This is not supported with system accounting.
Uses no accounting.
Method used to enable AAA system accounting. The value is one of the following
options:
• group tacacs+—Uses the list of all TACACS+ servers for accounting.
• group radius—Uses the list of all RADIUS servers for accounting.
• group named-group—Uses a named subset of TACACS+ or RADIUS servers
for accounting, as defined by the aaa group server tacacs+ or aaa group
server radius command.
Authentication, Authorization, and Accounting Commands