Users Group - Cisco NCS 5000 Series Manual

users group

users group
To associate a user group and its privileges with a line, use the users group command in line template
configuration mode. To delete a user group association with a line, use the no form of this command.
users group {usergroup-name| cisco-support| netadmin| operator| root-lr| root-system| sysadmin}
no users group {usergroup-name| cisco-support| netadmin| operator| root-lr| root-system| serviceadmin|
sysadmin}
Syntax Description
usergroup-name
cisco-support
netadmin
operator
root-lr
root-system
serviceadmin
sysadmin
Command Default
None
Command Modes
Line template configuration
Command History
Release
Release 6.0
System Security Command Reference for Cisco NCS 5000 Series Routers
112
Authentication, Authorization, and Accounting Commands
Name of the user group. The usergroup-name argument can be only one word.
Spaces and quotation marks are not allowed.
Specifies that users logging in through the line are given Cisco support
personnel privileges.
Specifies that users logging in through the line are given network administrator
privileges.
Specifies that users logging in through the line are given operator privileges.
Specifies that users logging in through the line are given root logical router
(LR) privileges.
Specifies that users logging in through the line are given root system privileges.
Specifies that users logging in through the line are given service administrator
group privileges.
Specifies that users logging in through the line are given system administrator
privileges.
Modification
This command was introduced.