Ssh Server Logging - Cisco NCS 5000 Series Manual

ssh server logging

ssh server logging
To enable SSH server logging, use the ssh server logging command. To discontinue SSH server logging, use
the no form of this command.
ssh server logging
no ssh server logging
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
Only SSHv2 client connections are allowed.
Once you configure the logging, the following messages are displayed:
• Warning: The requested term-type is not supported
• SSH v2 connection from %s succeeded (user:%s, cipher:%s, mac:%s, pty:%s)
The warning message appears if you try to connect using an unsupported terminal type. Routers running the
Cisco IOS XR software support only the vt100 terminal type.
The second message confirms a successful login.
Task ID
Task ID
crypto
Examples The following example shows the initiation of an SSH server logging:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ssh server logging
System Security Command Reference for Cisco NCS 5000 Series Routers
172
Modification
This command was introduced.
Operations
read, write
Secure Shell Commands