Radius-Server Retransmit (Bng) - Cisco NCS 5000 Series Manual

Authentication, Authorization, and Accounting Commands

radius-server retransmit (BNG)

To specify the number of times the Cisco IOS XR software retransmits a packet to a server before giving up,
use the radius-server retransmit command in the XR Config mode. The no form of this command sets it to
the default value of 3 .
radius-server retransmit {retries disable}
no radius-server retransmit {retries disable}
Syntax Description
retries
disable
Command Default
The RADIUS servers are retried three times, or until a response is received.
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
The RADIUS client tries all servers, allowing each one to time out before increasing the retransmit count.
Task ID
Task ID
aaa
Examples This example shows how to specify a retransmit counter value of five times:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# radius-server retransmit 5
Maximum number of retransmission attempts. The range is from 1 to 100.
Default is 3.
Disables the radius-server transmit command.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
radius-server retransmit (BNG)
Modification
This command was introduced.
47