Control-Plane - Cisco NCS 5000 Series Manual

Management Plane Protection Commands

control-plane

To enter the control plane configuration mode, use the control-plane command. To disable all the
configurations under control plane mode, use the no form of this command.
control-plane
no control-plane
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
XR Config mode
Command History
Release
Release 6.0.1
Usage Guidelines
Use the control-plane command to enter control plane configuration mode.
Task ID
Task ID
system
Examples
The following example shows how to enter control plane configuration mode using the control-plane
command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# control-plane
RP/0/RP0/CPU0:router(config-ctrl)#
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
control-plane
Modification
This command was introduced.
135