Show Key Chain - Cisco NCS 5000 Series Manual

Keychain Management Commands

show key chain

To display the keychain, use the show key chain command.
show key chain key-chain-name
Syntax Description
key-chain-name
Command Default
If the command is used without any parameters, then it lists out all the key chains.
Command Modes
XR EXEC mode
Command History
Release
Release 6.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
system
Examples When a secure key storage becomes available, it is desirable for keychain management to alternatively prompt
you for a master password and display the key label after decryption. The following example displays only
the encrypted key label for the show key chain command:
RP/0/RP0/CPU0:router# show key chain isis-keys
Key-chain: isis-keys/ -
accept-tolerance -- infinite
Key 8 -- text "8"
cryptographic-algorithm -- MD5
Send lifetime:
Accept lifetime: 01:00:00, 29 Jun 2006 - Always valid [Valid now]
Names of the keys in the specified keychain. The maximum number of
characters is 32.
01:00:00, 29 Jun 2006 - Always valid
System Security Command Reference for Cisco NCS 5000 Series Routers
Modification
This command was introduced.
Operations
read
[Valid now]
show key chain
127