Accept-Lifetime - Cisco NCS 5000 Series Manual

accept-lifetime

accept-lifetime
To set the time period during which the authentication key on a keychain is received as valid, use the
accept-lifetime command in key configuration mode. To revert to the default value, use the no form of this
command.
accept-lifetime start-time [duration duration value| infinite| end-time]
no accept-lifetime start-time [duration duration value| infinite| end-time]
Syntax Description
start-time
duration duration value
infinite
end-time
Command Default
None
Command Modes
Key configuration
Command History
Release
Release 6.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
system
System Security Command Reference for Cisco NCS 5000 Series Routers
116
Start time, in hh:mm:ss day month year format, in which the key becomes valid.
The range is from 0:0:0 to 23:59:59.
The range for the number of days of the month is from 1 to 31.
The range for the years is from 1993 to 2035.
(Optional) Determines the lifetime of the key in seconds. The range is from
1-2147483646.
(Optional) Specifies that the key never expires after it becomes valid.
(Optional) Time, in hh:mm:ss day month year format, after which the key expires.
The range is from 0:0:0 to 23:59:59.
Operations
read, write
Keychain Management Commands
Modification
This command was introduced.