Aaa Default-Taskgroup - Cisco NCS 5000 Series Manual

Authentication, Authorization, and Accounting Commands

aaa default-taskgroup

To specify a task group for both remote TACACS+ authentication and RADIUS authentication, use the aaa
default-taskgroup command in the XR Config mode. To remove this default task group, enter the no form
of this command.
aaa default-taskgroup taskgroup-name
no aaa default-taskgroup
Syntax Description
taskgroup-name
Command Default
No default task group is assigned for remote authentication.
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
Use the aaa default-taskgroup command to specify an existing task group for remote TACACS+
authentication.
Task ID
Task ID
aaa
Examples
The following example shows how to specify taskgroup1 as the default task group for remote TACACS+
authentication:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa default-taskgroup taskgroup1
Name of an existing task group.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
aaa default-taskgroup
Modification
This command was introduced.
15