Cisco NCS 5000 Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. NCS 5000 Series
  6. Hardware installation manual
Cisco NCS 5000 Series Hardware Installation Manual

Cisco NCS 5000 Series Hardware Installation Manual

Hide thumbs Also See for NCS 5000 Series:
Table of Contents

Advertisement

Quick Links

See also: Manual
Hardware Installation Guide for Cisco NCS 5000 Series Routers
First Published: 2015-12-23
Last Modified: 2016-11-01
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco NCS 5000 Series

Summary of Contents for Cisco NCS 5000 Series

  • Page 1 Hardware Installation Guide for Cisco NCS 5000 Series Routers First Published: 2015-12-23 Last Modified: 2016-11-01 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

  • Page 3: Table Of Contents

    Installing the NCS 5000 Router C H A P T E R 4 Installation Guidelines Installing Cisco NCS 5000 Installing Cisco NCS 5001 Installing Cisco NCS 5002 Installing Cisco NCS 5011 Grounding Cisco NCS 5000 Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 4 Specifications for the Cisco NCS 5011 Power Supply Cable and Port Specification A P P E N D I X D Console Port Supported Power Cords and Plugs Jumper Power Cord Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 5 Contents LEDs A P P E N D I X E Chassis and Module LEDs for the Cisco NCS 5000 Series Routers Chassis and Module LED Descriptions Conditions Indicated by the Power Supply LEDs Troubleshooting Hardware Components A P P E N D I X F...
  • Page 6 Contents Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 7: Preface

    What's New in Cisco Product Documentation. To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What's New in Cisco Product Documentation RSS feed. RSS feeds are a free service.
  • Page 8 Preface Obtaining Documentation and Submitting a Service Request Hardware Installation Guide for Cisco NCS 5000 Series Routers viii...

  • Page 9: Overview

    It can also operate as an extension shelf of Cisco ASR 9000 Series Aggregation Services Routers using Network Virtualization (nV) technology, consolidating multiple layers in the network and dramatically reducing operational costs.
  • Page 10 Overview Cisco NCS 5001 The Cisco NCS 5001 router is a small form factor dense GE/10GE aggregation systems. Powered by industry leading routing operation system, IOS-XR, the system also offers rich functions such as third party application hosting, machine-to-machine interface, telemetry and flexible package delivery.
  • Page 11 (back) side of the router. Power Supply The Cisco NCS 5001 chassis has slots for two 1+1 redundant power supplies. Power supply options need to be configured with the base chassis. A minimum of one power supply is required for normal operation. The following table lists the power supplies that are configurable with the Cisco NCS 5001 router.

  • Page 12: Cisco Ncs 5002

    Network Virtualization (nV) technology, consolidating multiple layers in the network and dramatically reducing operational costs. The Cisco NCS 5002 router is a small form factor dense GE/10GE aggregation systems in 2RU form factor. Powered by industry leading routing operation system, IOS-XR, the system also offers rich functions such as third party application hosting, machine-to-machine interface, telemetry and flexible package delivery.

  • Page 13: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    • A management, console, and the USB interface on the port (front) side of the router Power Supply The Cisco NCS 5002 chassis has slots for two 1+1 redundant power supplies. Power supply options need to be configured with the base chassis. A minimum of one power supply is required for normal operation. The following table lists the power supplies that are configurable with the Cisco NCS 5002 router.

  • Page 14: Cisco Ncs 5011

    Cisco NCS 5011 Cisco NCS 5011 The Cisco NCS 5011 router is also an extension to Cisco's routing platform portfolio enabling Service Providers and MPLS enabled data center architectures to offer elastic networks with improved business agility and simplified operations to deliver high-bandwidth mobile, video, and cloud services.

  • Page 15: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Overview Cisco NCS 5011 The Cisco NCS 5011 router is a small form factor dense GE/10GE aggregation systems in 1RU form factor. Powered by industry leading routing operation system, IOS-XR, the system also offers rich functions such as third party application hosting, machine-to-machine interface, telemetry and flexible package delivery.

  • Page 16: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    • A management, console, and the USB interface on fan side of the router Power Supply The Cisco NCS 5011 chassis has slots for two 1+1 redundant power supplies. Power supply options need to be configured with the base chassis. A minimum of one power supply is required for normal operation. The following table lists the power supplies that are configurable with the Cisco NCS 5011 router.

  • Page 17: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Overview Cisco NCS 5011 Part Number Fan Module NCS-5011-FN-BK Cisco NCS 5011 Router Fan Back to Front Airflow NCS-5011-FN-BK= Cisco NCS 5011 Router Fan Back to Front Airflow, spare Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 18: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Overview Cisco NCS 5011 Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 19: Safety Guidelines

    C H A P T E R Safety Guidelines This chapter lists and describes all the safety guidelines for Cisco NCS 5000 Series routers. Read these safety guidelines before installing Cisco NCS 5000 routers. • Cisco NCS 5000 Safety Guidelines, page 11...

  • Page 20: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Safety Guidelines Cisco NCS 5000 Safety Guidelines Warning Note When installing or replacing the unit, the ground connection must always be made first and disconnected last. Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 21: Prepare To Install Cisco Ncs 5000

    Unpack and Inspect the New Router, page 14 Installation Options with Racks and Cabinets The Cisco NCS 5000 series routers can be installed in the following types of racks using a rack-mount kit shipped with the router: • Open EIA rack •...

  • Page 22: Required Equipment

    • Disconnect all power and external cables before lifting the router. • Ensure that two people lift the router. The Cisco NCS 5001 router with two power supplies, weighs 22 lb, and the Cisco NCS 5002 with two power supplies, weighs 46 lbs. The Cisco NCS 5011 with two power supplies, weighs 22.2 lbs.

  • Page 23: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    • Model and serial number of the missing or damaged unit • Description of the problem and how it affects the installation • Photos of the damage to external packaging, internal packaging, and product • Effect of damage on the installation Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 24: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Prepare to Install Cisco NCS 5000 Unpack and Inspect the New Router Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 25: Installing The Ncs 5000 Router

    C H A P T E R Installing the NCS 5000 Router This chapter describes how to install the Cisco NCS 5000 Series routers. This chapter includes the following sections: • Installation Guidelines, page 17 • Installing Cisco NCS 5000, page 18 •...

  • Page 26: Installing Cisco Ncs 5000

    The following sections describe how to install the Cisco NCS 5000 Series routers. Installing Cisco NCS 5001 This section describes how to use the rack-mount kit provided with the router to install the Cisco NCS 5001 router into a cabinet or rack that meets the requirements described in...

  • Page 27: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Installing Cisco NCS 5001 b) Repeat Step 1a with the other front rack-mount bracket on the other side of the router. Figure 7: Rack-mount brackets at the front on Cisco NCS 5001 Step 2 Install the rear rack-mount guides on the chassis as follows: a) Position a rear rack-mount bracket on the side of the chassis with its four holes aligned to four of the six screw holes on the side of the chassis, and then use four M4 screws to attach the bracket to the chassis.

  • Page 28: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Installing Cisco NCS 5001 b) Repeat Step 2a with the other rear rack-mount bracket on the other side of the router. Figure 8: Rack-mount brackets at the rear side on Cisco NCS 5001 Step 3 Install the slider rails to the rack as follows: a) Position the slider rails at the desired levels on the back side of the rack and use two 12-24 screws or two 10-32 screws, depending on the rack thread type, to attach the rails to the rack.

  • Page 29: Installing Cisco Ncs 5002

    Installing Cisco NCS 5002 Installing Cisco NCS 5002 This section describes how to use the rack-mount kit provided with the router to install the Cisco NCS 5002 router into a cabinet or rack that meets the requirements described in Cabinet and Rack Installation , on page...
  • Page 30 Installing Cisco NCS 5002 b) Repeat Step 1a with the other front rack-mount bracket on the other side of the router. Figure 9: Rack-Mount Brackets on the Front Side on Cisco NCS 5002 1 - Rack mount bracket 2 - Screws...

  • Page 31: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Repeat Step 2a for the other side of the router. Figure 10: Assembling Rack Mount and Slider 1 - Slider 2 - Rack mount 3 - Screws Step 3 Install the slider rails to the rack as follows: Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 32: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Repeat for the other front rack-mount bracket on the other side of the router. Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 33: Installing Cisco Ncs 5011

    Installing Cisco NCS 5011 Installing Cisco NCS 5011 This section describes how to use the rack-mount kit provided with the router to install the Cisco NCS 5011 router into a cabinet or rack that meets the requirements described in Cabinet and Rack Installation , on page...

  • Page 34: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Installing Cisco NCS 5011 c) Repeat Step 1a with the other front rack-mount bracket on the other side of the router. Figure 12: Rack-Mount Brackets on the Front Side on Cisco NCS 5011 Step 2 Install the rear rack-mount brackets on the rack as follows: a) Align the two screw holes on a rear rack-mount bracket to the middle two screw holes in the remaining six screw holes on a side of the chassis, and use two M4 screws to attach the bracket to the router.

  • Page 35: Grounding Cisco Ncs 5000

    Grounding Cisco NCS 5000 This section describes how to ground the Cisco NCS 5000 series routers. Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 36: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Step 1 On Cisco NCS 5001 and NCS 5011 remove the label on the rear side (fan side) of the router to expose the ground mounting holes (as shown in the figure). On Cisco NCS 5002, remove the label on the right side of the front side (port side) of the router to expose the ground mounting holes (as shown in the figure).

  • Page 37: Hardware Installation Guide For Cisco Ncs 5000 Series Routers

    Figure 15: Grounding the Cisco NCS 5002 Router 1 - Ground Lug 2 - Label Figure 16: Grounding the Cisco NCS 5011 Router 1 - Ground Lug 2 - Ground Lug bracket Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 38: Starting Cisco Ncs 5000

    Starting Cisco NCS 5000 This section provides instructions for powering up the Cisco NCS 5000 series routers and verifying their component installation. Do not connect the Ethernet port to the LAN until the initial router configuration has been performed.
  • Page 39 Note If you purchased this product through a Cisco reseller, contact the reseller directly for technical support. If you purchased this product directly from Cisco, contact Cisco Technical Support at this URL: http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html.
  • Page 40 Installing the NCS 5000 Router Starting Cisco NCS 5000 Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 41: Replacing Ncs 5000 Router Components

    C H A P T E R Replacing NCS 5000 Router Components This chapter describes how to replace modules in the Cisco NCS 5000 Series routers. This chapter includes the following sections: • Replacing a Fan Module, page 33 •...
  • Page 42 Holding the fan module by its handle, align the back of the fan module (the side with the electrical connectors) to the open fan slot in the chassis. b) Slide the fan module into the slot until it clicks in place. Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 43: Replacing A 2 (Ru) Fan Module

    Place the fan module into the front chassis cavity so it rests on the chassis, and then push the fan module into the chassis as far as it can go until the captive screw makes contact with the chassis. c) Tighten the captive screw. Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 44: Replacing An Ac Power Supply

    Remove the power supply as follows: a) Pull the power cord out from the power receptacle on the power supply to be removed and verify that the OK LED turns off. Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 45 (the end with the electrical connections) to the open power supply slot and slide the power supply all the way into the slot until it clicks into place. Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 46: Replacing A Dc Power Supply

    Connect the power cord to the power supply and to an DC power outlet. Turn on the power at the power source. Figure 21: Connect Power Cord to DC Power Outlet Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 47: Replacing The Air Filter

    C first, followed by piece B and then piece A. Figure 22: Replacing port side inlet air filter 3x5 captive screws Mid Panel (Piece C) 4x4 captive screws Bottom Panel (Piece B) Top Panel (Piece A) Unit Faceplate Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 48: Replace Power Module Air Filter

    Place the air filter in position on the front of the power module. b) Place the holder in position on the front of the power module over the air filter. c) Press the holder firmly but gently until it snaps into place. Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 49 Replacing NCS 5000 Router Components Replace Power Module Air Filter d) Slide in the power supply panel and tighten it using one screw. Figure 23: Replacing the power module air filter Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 50 Replacing NCS 5000 Router Components Replace Power Module Air Filter e) Gently snap in the fan filter into the clip-on holder. Figure 24: Replacing the fan filter Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 51: Appendix A Accessory Kits

    Accessory Kit Contents, page 43 Accessory Kit Contents This appendix describes the contents of the accessory kits for the Cisco NCS 5000 Series routers. Cisco NCS 5001 Router Accessory Kit This section describes the accessory kit contents for the Cisco NCS 5001 router accessory kit (NCS-5001-ACSR).

  • Page 52: Cisco Ncs 5011 Router Accessory Kit

    Additional parts can be ordered from your customer service representative. Note Cisco NCS 5011 Router Accessory Kit This section describes the accessory kit contents for the Cisco NCS 5011 router accessory kit (NCS-5011-ACSR). The Cisco NCS 5011 router accessory kit includes the following items: • 2 rack-mount guides •...

  • Page 53: Appendix B Cabinet And Rack Installation

    A P P E N D I X Cabinet and Rack Installation This appendix provides the requirements for cabinet and rack installation for the Cisco NCS 5000 router and includes the following sections: • Cabinet and Rack Requirements, page 45 •...

  • Page 54: Requirements Specific To Perforated Cabinets

    The cabinet or rack must also meet the following requirements: • The minimum vertical rack space for the Cisco NCS 5000 router chassis must be one RU (rack units). • The width between the rack-mounting rails must be at least 19 inches if the rear of the router is not attached to the rack.

  • Page 55: Appendix C Technical Specifications

    A P P E N D I X Technical Specifications This appendix describes the technical specifications for the Cisco NCS 5001 and 5002 routers. This appendix includes the following sections: • Router Specifications, page 47 • Environment Specification, page 48 •...

  • Page 56: Environment Specification

    Cisco NCS 5011 with two 650W power supplies, and 22.2 lb (10.6 kg) four fan modules Environment Specification The following table lists the environmental specifications for the Cisco NCS 5001 Router. Table 14: Environmental Specifications for the Cisco NCS 5001 Router Property Cisco NCS 5001 Router Operating temperature 32 to 104°F (0 to 40°C)

  • Page 57: Power Specifications

    This section describes the power specifications for the Cisco NCS 5000 Series routers. Specifications for the Cisco NCS 5001 Power Supply The following table lists the Power supply specifications for the Cisco NCS 5001 Series routers. Table 17: Specifications for the Cisco NCS 5001 AC Power Supply...

  • Page 58: Specifications For The Cisco Ncs 5002 Power Supply

    The minimum cable sizing required for DC power supply is 10 AWG. Note Specifications for the Cisco NCS 5002 Power Supply The following table lists the Power supply specifications for the Cisco NCS 5002 Series router. Table 19: Specifications for the Cisco NCS 5002 AC Power Supply AC Power Supply Properties...

  • Page 59: Specifications For The Cisco Ncs 5011 Power Supply

    The minimum cable sizing required for DC power supply is 10 AWG. Note Specifications for the Cisco NCS 5011 Power Supply The following table lists the Power supply specifications for the Cisco NCS 5011 Series router. Table 21: Specifications for the Cisco NCS 5011 AC Power Supply AC Power Supply Properties...
  • Page 60 Technical Specifications Specifications for the Cisco NCS 5011 Power Supply DC Power Supply Properties Specifications RoHS Compliance The minimum cable sizing required for DC power supply is 10 AWG. Note Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 61: Appendix D Cable And Port Specification

    Only the regular power cords or jumper power cords provided with the router are supported. Note The following table lists the power cords for the Cisco NCS 5000 Series router and provides their lengths in feet and meters. Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 62 Cable and Port Specification Supported Power Cords and Plugs Table 23: Power Cords for the Cisco NCS 5000 Series Router Description Length Power Cord Reference Illustration Feet Meters CAB-250V-10A-AR Power cord 250 VAC 10 A, IRAM 2073 plug Argentina CAB-9K10A-AU Power...
  • Page 63 250 VAC 10 A, MP232 plug Switzerland CAB-9K10A-UK Power cord 250 VAC 10 A, BS1363 plug (13 A fuse) United Kingdom CAB-AC-250V/13A Power cord 250 VAC 13 A, NEMA L6-20 plug North America Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 64 CAB-C13-CBN Power cord 250 VAC 10 A, SS 10A plug CAB-IND-10A Power cord 250 VAC 10 A, EL 208B plug CAB-C13-C14-JMPR Cabinet Jumper Power Cord 250 VAC 13 A, C13-C14 Connectors Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 65: Jumper Power Cord

    Jumper Power Cord Jumper Power Cord The following figure shows the plug connector on the optional jumper power cord for the Cisco NCS 5001 and 5002 Series routers. This cable plugs into the power supply, and the receptacle of a power distribution unit for a cabinet.
  • Page 66 Cable and Port Specification Jumper Power Cord Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 67: Chassis And Module Leds For The Cisco Ncs 5000 Series Routers

    A P P E N D I X LEDs This appendix describes the conditions indicated by the chassis and module LEDs on the Cisco NCS 5000 Series routers. • Chassis and Module LEDs for the Cisco NCS 5000 Series Routers, page 59...

  • Page 68: Conditions Indicated By The Power Supply Leds

    AC present, 3.3 voltage standby (VSB) on, and the power supply unit is off. Blinking For a DC power supply, it indicates that DC power is present. Power supply on and OK. Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 69: Appendix F Troubleshooting Hardware Components

    Use the recommendations in this section to ensure the proper installation, initialization, and operation of the router. This section includes the following topics: • Installation Best Practices, on page 62 • Initialization Best Practice, on page 62 • Power Supply Conditions, on page 62 Hardware Installation Guide for Cisco NCS 5000 Series Routers...

  • Page 70: Installation Best Practices

    LED is on, blinking, or off and refer the following table. Table 25: Power Supply Condition Power Supply Condition Power LED Status Fail LED Status No power to all power status. Power supply failure, including overvoltage, overcurrent, overtemperature, and fan failure. Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 71 These events include high temperature, high power, and slow fan. AC present, 3.3 voltage standby Blinking (VSB) on, and the power supply unit is off. Power supply on and OK. Hardware Installation Guide for Cisco NCS 5000 Series Routers...
  • Page 72 Troubleshooting Hardware Components Power Supply Conditions Hardware Installation Guide for Cisco NCS 5000 Series Routers...

Table of Contents