Ssh Server V2 - Cisco NCS 5000 Series Manual

Secure Shell Commands

ssh server v2

To force the SSH server version to be only 2 (SSHv2), use the ssh server v2 command. To bring down an
SSH server for SSHv2, use the no form of this command.
ssh server v2
no ssh server v2
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
Only SSHv2 client connections are allowed.
Task ID
Task ID
crypto
Examples The following example shows how to initiate the SSH server version to be only SSHv2:
RP/0/RP0/CPU0:router#configure
RP/0/RP0/CPU0:router(config)# ssh server v2
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
ssh server v2
Modification
This command was introduced.
175