Cisco NCS 5000 Series Manual page 25

Authentication, Authorization, and Accounting Commands
Task ID
Task ID
aaa
Examples
The following example shows the configuration of an AAA group server named radgroup1, which comprises
three member servers:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa group server radius radgroup1
RP/0/RP0/CPU0:router(config-sg-radius)# server 10.0.0.5 auth-port 1700 acct-port 1701
RP/0/RP0/CPU0:router(config-sg-radius)# server 10.0.0.10 auth-port 1702 acct-port 1703
RP/0/RP0/CPU0:router(config-sg-radius)# server 10.0.0.20 auth-port 1705 acct-port 1706
If the auth-port port-number and acct-port port-number keywords and arguments are not specified, the
Note
default value of the port-number argument for the auth-port keyword is 1645 and the default value of
the port-number argument for the acct-port keyword is 1646.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
aaa group server radius
17