Installing a WAN Adapter Module Filler Panel
If you plan to remove a WAN adapter module from the Passport 5430 without
immediately replacing it, you must install a WAN adapter module filler panel in
the slot.
To install a WAN adapter module filler panel:
1.
Module 3
Module 4
Module 5
Remote
Console
Figure 3-6.
Installing a WAN Adapter Module Filler Panel
2.
3.
306308-A Rev 00
Insert the filler panel in the adapter module slot
U
ISDN BRI
withNT1
COM
Telco
V.34 Modem
Insert a screw through the hole in the filler panel and on through the
Passport 5430's front panel.
Tighten the screw with a Phillips screwdriver.
Accessing the Interior
(Figure
FBR0078A
3-6).
3-9