Table of Contents
Advertisement
OSPF Worksheet
Requested Information
Enter decimal value in seconds for Poll
Interval [120]:
(For NBMA only)
Enter IP address of neighbor in dotted
decimal notation or enter q to quit:
(For NBMA only)
Enter IP address of neighbor in dotted
decimal notation:
(For PPP only)
Static Route to Site Manager Worksheet
Requested Information
Destination Network [0.0.0.0]:
Destination Network Mask [0.0.0.0]:
Next-Hop Address:
306308-A Rev 00
(continued)
Options
Enter the largest number of
seconds allowed between Hello
packets that the router sends to an
inactive NBMA neighbor.
The router suggests a 120-second
interval.
Enter addresses for all NBMA
neighbors that you want the router
to communicate with.
When you finish entering
addresses, enter q.
Enter addresses for the PPP
neighbors that you want the router
to communicate with.
Options
Enter the gateway address of the
destination network. An address
of 0.0.0.0 specifies the default
route.
Enter the subnet mask of the
destination network. A mask of
0.0.0.0 specifies the default
route.
Enter a next-hop address. All
static routes require a next-hop
address in the same subnet as
the initial IP interface.
Worksheets for the Quick-Start Procedure
Your Response
Your Response
(continued)
B-11
Advertisement
Table of Contents
