Table of Contents
Advertisement
Installing and Operating the Passport 5430 Multiservice Access Switch
Installing the Flash Memory Card
Nortel Networks ships the router software on a PCMCIA flash memory card
(Figure
system (NVFS) in the Passport 5430.
Note: The Passport 5430 supports only 5 volt (V) flash memory cards. The
Passport 5430 does not support BayRS 12 V flash memory cards.
Figure 5-1.
The Passport 5430 supports one or two PCMCIA flash cards and can boot from
either card.
Before starting the Passport 5430, install the flash memory card supplied with the
router:
Position the card with the label facing up and the INSERT arrow
1.
pointing toward the card receptacle.
Insert the card into one of the two card receptacles
2.
gently push the card until it fits snugly into place.
5-6
5-1). The flash memory card provides storage for the nonvolatile file
Flash Memory Card
FBR0102A
(Figure 5-2)
and
306308-A Rev 00
Advertisement
Table of Contents
