Figure 10-1. Location Of Wan Adapter Module Slots - Nortel Passport 5430 Installing And Operating Instructions

4.
Passport 5430 front panel
Module 3
Module 4
Module 5
Remote
Console
Figure 10-1.
Note: The slot labeled Remote Console is reserved for the V.34 console
modem adapter module for out-of-band management.
306308-A Rev 00
Determine which of the four front-panel adapter module slots to use
(Figure 10-1).
U
ISDN BRI
withNT1
COM
DDS
156K/64K
DSU/CSU
Telco
V.34 Modem
Location of WAN Adapter Module Slots
When installing WAN adapter modules in the Passport 5430 WAN adapter
module slots, note the following:
• Each WAN adapter module you install is automatically assigned a circuit,
even if the WAN adapter module has not been configured. This prevents
disruption of active circuits if you reconfigure the module at a later time.
• ISDN BRI adapter modules can use two circuits (one for each of the 2 B
channels).
• You can configure a total of 4 circuits.
• Circuit allocations are prioritized according to the slot that the WAN
adapter module occupies. Module slot 3 has priority over Module slot 4,
and Module slot 4 has priority over Module slot 5.
Adding or Replacing a WAN Adapter Module
FBR0025A
10-3