Nortel Passport 5430 Installing And Operating Instructions page 86

Installing and Operating the Passport 5430 Multiservice Access Switch
You can do this either through the terminal emulation program or the PC
control panel and the instructions in your PC documentation.
Route the cable through the cable loom slot corresponding to PCI slot 1.
3.
For instructions, see
page
Insert the blue RJ-45 receptacle end of the console cable into the Passport
4.
5430 Console port
For pin assignments, see "Local Console Connections" on page A-17.
U
Module 3
ISDN BRI
withNT1
COM
Module 4
COM
Module 5
Telco
Remote
V.34 Modem
Console
Figure 4-6. Connecting the Console Cable
Arrange the cable in the cable loom.
5.
For instructions, see
page
4-8
"Using the Cable Looms to Manage
4-17.
(Figure
"Using the Cable Looms to Manage
4-17.
4-6).
System
Processor
PCI Slot 1
Voice Processor
PCI Slot 2
Expansion Card
PCI Slot 3
Expansion Card
Cables" on
FBR0064A
Cables" on
306308-A Rev 00