Nortel Passport 5430 Installing And Operating Instructions page 206

Installing and Operating the Passport 5430 Multiservice Access Switch
Router Protocol Worksheets
These worksheets provide requested information and possible options relating to
the routing protocol choices on the Global Worksheet.
RIP Worksheet
Requested Information
RIP will listen to a specific route to the
network or subnet where Site Manager
is located. If you would also like RIP to
listen to the default route (0.0.0.0) then
answer 'y' below. The default route is
useful when no specific route is
available in the RIP updates received
by this router.
Should RIP listen to the default route?
(y/n) [n]:
Specify the version of RIP . The default
is to run RIP1. RIP2 runs RIP2 without
the automatic aggregation of subnets
that RIP1 provides. RIP2_AGGR
provides the automatic aggregation of
subnets for RIP2.
Enter Routing Protocol Number [1]:
B-8
Options
y(es)
n(o)
1. RIP1
2. RIP2
3. RIP2_AGGR
Your Response
306308-A Rev 00