Installing a PMC Module on the System Processor Card
To install a PMC module on the system processor card:
1.
Caution: Electrostatic discharge can damage hardware. You must wear the
antistatic wrist strap on your arm whenever you handle printed circuit boards.
2.
3.
4.
5.
306308-A Rev 00
Installing Passport 5430 Customer-Replaceable Units for the First Time
Put on an antistatic wrist strap.
For instructions, see "Attaching the Antistatic Wrist Strap" on page 3-2.
Place the system processor card on a flat surface.
Make sure that you are installing the appropriate PMC module on the
system processor card.
For instructions, refer to
Hold the PMC module with the connectors facing down.
Place the PMC module on the system processor card by sliding the PMC
module interface panel into the PMC module opening on the system
processor card
(Figure
Table 2-1
on
page
2-3.
2-8).
2-9