Verifying Shipment Contents - Nortel Passport 5430 Installing And Operating Instructions

Installing and Operating the Passport 5430 Multiservice Access Switch

Verifying Shipment Contents

You should inspect all items for shipping damage. If you detect any damage, do
not install the Passport 5430. Call the Nortel Networks Technical Solutions Center
in your area (see "How to Get Help" on page xxvii).
In addition to the Passport 5430 and this guide, your shipping container should
contain several other hardware accessories. Verify that the items in the shipping
container match those on the packing list affixed to the shipping container. Refer
to Table 1-1
Table 1-1.
Quantity
1-2
when verifying the contents of the shipping container.
Accessories in the Passport 5430 Shipping Container
Item
1 Antistatic wrist strap
1 Console cable
(Order No. 307958-A)
1 Modem adapter
2 Flange brackets
4 #8 flathead Phillips
screws
2 Angle brackets
(Order No. 105521)
4 #8 panhead Phillips
screws
8 #10 cagenut screws
and cagenuts
4 #10 flat washers
2 Cable looms
Description
Used to direct the discharge of static
electricity from your body to the chassis,
thereby avoiding discharge to, and possible
damage of, sensitive electronic
components.
Used to connect to an optional local
console.
Used to connect an external modem to the
Passport 5430.
Used to mount the Passport 5430 in an
equipment rack.
Used to attach the flange brackets to the
chassis.
Used to mount the Passport 5430 in an
equipment rack.
Used to attach cable looms to the chassis
when the flange brackets are in the center
configuration.
Used to install the angle brackets in the
equipment rack and to install the Passport
5430 in an equipment rack without threaded
rail holes.
Used to mount the Passport 5430 in an
equipment rack.
Used to manage network interface cables.
306308-A Rev 00