Preparing To Install The Passport 2430; Verifying Shipment Contents - Nortel Passport 2430 Installing And Operating Instructions

Preparing to Install the Passport 2430

Verify the following before beginning the installation, as explained in the sections
that follow:
•
•
•
•

Verifying Shipment Contents

You should inspect all items for shipping damage. If you detect any damage, do
not install the Passport 2430. Call the Nortel Networks Technical Solutions Center
in your area, as described in "How to Get Help" on page xxi.
In addition to the Passport 2430 and this guide, your shipping container should
contain several other items. Verify that the items in the shipping container match
those on the packing list affixed to the shipping container.
Refer to the following checklist and to
shipping container:
_ Antistatic wrist strap
_ Power supply for Passport 2430
_ One power cord
_ One RJ-45 to DB-9 cable
308224-B Rev 00
Your shipment is complete and undamaged.
You have the proper equipment and tools.
Your installation site meets physical, electrical, and environmental
requirements (see Appendix A, "Passport 2430 Technical Specifications").
You have the cabling that you need to attach to the Passport 2430.
Installing the Passport 2430 Chassis
Figure 1-2 to verify the contents of the
1-3