Setting Of Zig-Zag Stitch Width For Machines 523I, 524I, 527I And A Zig-Zag Stitch Position For Machines 523I, 524I - Dürkopp Adler 52 i-75 Series Operating Instructions Manual

Operation
Operating Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
4.12 Setting of zig-zag stitch width for machines
523i, 524i, 527i and a zig-zag stitch position
for machines 523i, 524i
VAROVÁNÍ
Risk of the needle breaking!
At setting the zig-zag stitch width and position
the needle must not be inside the sewn material.
Pic. 15: Setting of zig-zag stitch width and position
(1) - Lever
(2) - Lever
Setting the zig-zag width
1. Press the arresting lever (3) in the arrow direction until it
strikes the lever (2).
 The arrest of lever (2) and lever (1) is released.
2. Grip both levers (3) and (2) at the same time and set the zig-
zag stitch width by turning the lever (2) against the selected
number indicating the stitch width.
3. Arrest the lever (2) position by turning the arresting lever (3)
against the arrow direction.
①
②
③
(3) - Arresting lever
53