Loop Ad. (Tray1); Loop Ad. (Bypass); Fls Paper Size - Konica Minolta bizhub 164 Service Manual

Field Service Ver. 2.0 Jun. 2010
11.3.17

LOOP Ad. (TRAY1)

A. Use
• To adjust the length of the loop formed in the paper feed from the tray1 before the syn-
chronizing roller.
• Used when a skew feed, fold, or misfeed of paper occurs.
• Used when variations in the amount of void on the leading edge occurs.
B. Procedure
1. Call SERVICE'S CHOICE of SERVICE MODE to the screen.
2. Select [LOOP Ad. (TRAY1)] and press the Menu/Select key.
1
3. Using [ ▲ / ▼ ] key, select the desired setting value.
4. Press the Menu/Select key to validate the setting value selected in step 3.
1
• Try a different setting value until there are no variations in the amount of void on the lead-
ing edge, and paper skew, fold, or misfeed.
11.3.18

LOOP Ad. (BYPASS)

A. Use
• To adjust the length of the loop formed in the paper feed from the manual bypass tray
before the synchronizing roller.
• Used when a skew feed, fold, or misfeed of paper occurs.
• Used when variations in the amount of void on the leading edge occurs.
B. Procedure
1. Call SERVICE'S CHOICE of SERVICE MODE to the screen.
2. Select [LOOP Ad. (BYPASS)] and press the Menu/Select key.
1
3. Using [ ▲ / ▼ ] key, select the desired setting value.
4. Press the Menu/Select key to validate the setting value selected in step 3.
1
• Try a different setting value until there are no variations in the amount of void on the lead-
ing edge, and paper skew, fold, or misfeed.
11.3.19

FLS PAPER SIZE

A. Use
• To select the paper size for FLS.
• Used when the FLS paper size is changed.
• Used at setup.
B. Procedure
• The default setting varies depending on the marketing area.
-3.234 to +3.234 mm (1 step: 0.462 mm)
-3.234 to +3.234 mm (1 step: 0.462 mm)
330✽203/330✽210/330✽216/330✽220/337✽206
11. SERVICE MODE
91
1