Density Priority; Density Level; Erase Setting - Konica Minolta bizhub 164 Service Manual

Field Service Ver. 2.0 Jun. 2010
9.7.2

DENSITY PRIORITY

A. Use
• To set the priority density that is selected when the power switch is turned ON or the
Back/Stop/Reset key is pressed.
AUTO : The density level is automatically adjusted.
MANUAL : The density level is manually adjusted.
B. Procedure
• The default setting is AUTO.
9.7.3

DENSITY LEVEL

A. AUTO
(1) Use
• To set the density level when the auto density is selected.
(2) Procedure
• The default setting is displayed with
B. MANUAL
(1) Use
• To set the density level when the manual density is selected.
(2) Procedure
• The default setting is displayed with
9.7.4

ERASE SETTING

A. Use
• Specify the erase width between 5 mm and 20 mm (in 1 mm increments) when making
copies with [LEFT ERASE], [UPPER ERASE] or [FRAME ERASE] selected for the
[ERASE] setting.
LEFT : Erases the left side of the original.
UPPER : Erases the upper side of the original.
FRAME : Erases the frame around the original.
B. Procedure
1. Select the erase position.
• The default setting is LEFT.
2. Set the erase width.
• The default setting is 10 mm.
"AUTO"/MANUAL
.
LIGHT DARK
.
LIGHT
"LEFT"/UPPER/FRAME
5 to 20 mm (1 step: 1 mm)
9. UTILITY MODE
DARK
77