Field Service Ver. 2.0 Jun. 2010
11.7.5
SCAN TEST
A. Use
• To check that the exposure lamp turns ON properly and the scanner moves properly.
• Used when the scan motion is faulty.
B. Procedure
1. Press the Menu/Select key to start the scan test.
1
2. Pressing the Stop key will stop the scan test.
11.7.6
TONER SUPPLY
A. Use
• To adjust the set T/C level by replenishing an auxiliary supply of toner when a low ID
occurs due to a lowered T/C after large numbers of prints have been made of originals
having a high image density.
B. Procedure
1. Press the Menu/Select key to start the toner supply function.
1
2. When the toner density returns to normal or a given period of time elapses after the
toner supply is started, the machine automatically stops supplying toner.
11.8 REPORT
11.8.1
SETTING DATA LIST
A. Use
• To produce an output of a list of setting values, adjustment values, counter values and
others.
• Used at the end of setup or when a malfunction occurs.
• The printing paper size of A3, A4S, A4, B4S, 8KS, 11x17S, LegalS, LetterS, Letter
should be set.
• No counters are activated. (Except PM counter, maintenance counter, supplies counter)
• The following items are recorded;
UTILITY
MACHINE SETTING/CUSTOM SIZE MEMORY/JOB SETTING/COPY SETTING
SERVICE MODE
SERVICE'S CHOICE/ADJUST/COUNTER/TOTAL COUNTER COUNT MODE/DIS-
PLAY
11. SERVICE MODE
115
1