Cleaning Of The Ds Collars - Konica Minolta bizhub 164 Service Manual

Field Service Ver. 2.0 Jun. 2010
4.1.7

Cleaning of the Ds collars

A. Periodically cleaning parts/cycle
• Ds collars: Every 55,000 counts
B. Procedure
1. Remove the toner bottle.
See P.19
2. Remove the imaging unit.
See P.41
[1]
[4]
[2]
4. PERIODICAL MAINTENANCE PROCEDURE
[2]
A0XXF2E513DA
[1]
[3]
A0XXF2E514DA
3. Release the tabs [1] and disconnect
the connector [2] from the imaging
unit.
4. Remove two screws [1] in the rear of
the imaging unit.
5. Remove three screws [2] at the front
of the imaging unit.
6. While slightly pulling the area below
the drum (diagonally shaded area) in
the direction of arrow, separate the
drum unit [3] from the developing unit
[4].
21