Konica Minolta bizhub 164 Service Manual page 89

5. OTHER MAINTENANCE ITEMS
[1]
[2]
[1]
[2]
[1]
[2]
9. To reinstall, reverse the order of removal.
10. Select [SERVICE MODE] - [CLEAR DATA] - [PM COUNTER] and clear the counter
value of [BYPASS].
52
[2]
[1] [3]
A0XXF2E046DA
[3]
A0XXF2E531DA
[4]
[3]
A0XXF2E532DA
Field Service Ver. 2.0 Jun. 2010
4. Remove two E-rings [1] and two
bearings [2].
5. Remove the multi bypass tray feed
roller assy [3].
6. While releasing the tab [1], remove
the collar [2].
NOTE
• Be careful not to lose shaft [3] at
this time.
7. Remove the E-ring [1], and remove
the weight [2].
8. Remove the multi bypass tray feed
roller [3].
NOTE
• Be careful not to lose shaft [4] at
this time.