8. Description of the control panel
8.1.5
Service call messages
• These messages are displayed when error(s) that cannot be handled by the user occur.
• The line-shaped LED lamp on the control panel lights up red steadily during service call.
• The control panel displays the following description at service call.
Display
LCD 1 A "Warning icon
are displayed on the right (for example, SERVICE CALL C002).
LCD 2
The error description is displayed (for example, RAM ERROR).
LCD 3
LCD 4 No display
• A printer icon is displayed with a flashing "warning icon
• A service call detected during startup of the printer is displayed as shown in the bottom
of the following picture.
Warning icon
Error message
State
Error message
• For the details of each item, see "Service call messages."
See P.80
80
Description
" is displayed and the service call message and a 4-digit-service call ID
SERVICE CALL C002
RAM ERROR
SERVICE CALL C002
RAM ERROR
Field Service Ver. 1.0 Nov. 2007
."
State
Warning icon
Printer icon
A0DXF3E507DA
A0DXF3E517DA