Installing The Tilt Ram - Yamaha F150B Service Manual

Trim cylinder end screw e:
140 N·m (14.0 kgf·m, 103.3 ft·lb)
7. Install the PTT
"Assembling the gear pump assembly"
(9-48).
8. Install the PTT reservoir. See "Installing
the reservoir" (9-44).

Installing the tilt ram

1. Place the tilt cylinder end screw a at the
position a.
2. Fill the tilt cylinder and PTT body with the
recommended fluid to the correct level
b.
a
a
b
Recommended PTT fluid: ATF Dexron ΙΙ
3. Place the tilt cylinder end screw at
position a, install the tilt ram assembly
into the tilt cylinder, and then tighten the
tilt cylinder end screw a to the specified
torque.
gear pump. See
b
a
Trim and tilt wrench b: 90890-06587
Trim cylinder end screw a:
128 N·m (12.8 kgf·m, 94.4 ft·lb)
4. Install the PTT motor assembly. See
"Installing the PTT motor" (9-44).
PTT cylinder
b
0
1
2
3
4
5
6
7
8
9
10
A
9-56