Yamaha F150B Service Manual page 380

BRKT
5. Install the upper and lower mounting
bolts into the bracket assembly i simul-
taneously.
6. Install the washers j, upper mounting
nuts k, and lower mounting nuts l, and
then tighten each nuts to the specified
torque.
j
k
j
i
j
l
Upper mounting nut k:
72 N·m (7.2 kgf·m, 53.1 ft·lb)
Lower mounting nut l:
72 N·m (7.2 kgf·m, 53.1 ft·lb)
7. Tighten the upper mount bracket bolts m
to the specified torque in the sequence
numbers (a, b, · · ·).
m
Bracket bolt m:
54 N·m (5.4 kgf·m, 39.8 ft·lb)
8. Tighten the lower mount bracket bolts
(PORT and STBD) n.
9-15
Bracket unit
j
a
b
c
n
9. Connect the ground lead o.
10. Pass the speedometer hose p through
the steering arm q, and then connect it
to the speedometer hose adapter r.
p
q
o
r
11. Install the drain bolt. See "Assembling
the upper case" (9-17) step 7.
r
o