Installing The Wiring Harness - Yamaha F150B Service Manual

POWR
13. Remove the
disconnect the fuse box couplers u, v,
and connector w.
u
v
w
14. Disconnect the oil pressure sensor
coupler x, thermoswitch connectors y,
and ignition coil couplers A, and then
remove the bracket e.
x
15. Disconnect the starter relay leads B,
PTT relay coupler D and ground leads
E.
E
B
16. Remove the air temperature sensor
coupler F and YDIS coupler G.
7-9
Power unit
fuse box, and then
y
e
D
G

Installing the wiring harness

To install all of the wiring harnesses, see
"Wiring harness routing" (5-6).
1. Install the sensors and switches that
were removed to the power unit.
2. Install the air temperature sensor coupler
a and YDIS coupler b.
b
A
3. Connect the starter relay leads c, PTT
relay couplers d, and ground leads e.
F
a
e
c
d