Dr 35 Securedisplay Data - Siemens SIWAREX WP251 Manual

Tare weight (via command 705 for 5 seconds)
Restriction code (via command 801 for 5 seconds)
Set point (via command 721 for 5 seconds)
Total set point (via command 722 for 5 seconds)
Totalizer 1 (via command 771 for 5 seconds)
Totalizer 2 (via command 772 for 5 seconds)
Serial number of WP251 (via command 871 for 5 seconds)
Firmware version of WP251 (via command 875 for 5 seconds)
SecureDisplay version (via command 876 for 5 seconds)
8.31

DR 35 SecureDisplay data

For a scale requiring official calibration in which "SecureDisplay" communicates with WP251
via the CPU, data record 35 provides the coded weight value. In this case it must be ensured
that the data record is read from SIWAREX to the CPU in a fixed time grid (OB 35) using
command code 2035. If this is not the case, "SecureDisplay" remains in "StartUp" state. For
applications not requiring official calibration, DR 35 is not relevant to the operation of the
scale.
Table 8- 31 Assignment of data record 35
Variable
Data record number
Length
Application
Version identifier
SecureDisplayData
SIWAREX WP251
Manual, 12/2015, A5E37203357A
Remark
Contains no. of the data record
Data record length information
Information about which applica-
tion the DR belongs to
Current data record version in-
formation
Type Length
(bytes)
USHORT 2
USHORT 2
USHORT 2
USHORT 2
UBYTE[32] 32
Scale parameters and functions
8.31 DR 35 SecureDisplay data
From DR 30
From DR 3
From DR 20
From DR 21
From DR 30
From DR 30
From DR 9
From DR 9
From DR 3
Rw Default Min.
r 35 -
r 40 -
r 105 -
r 1 1
r 0 -
Max.
-
-
-
65635
-
151