Viewing All Data (Info) - Siemens Wireless Room Sensor Solution User Manual

Table 12 defines TEST command result parameters.
Parameter
2340:591
1
12
0
1
–43
–41
–98

Viewing All Data (INFO)

You can use the INFO command to get complete configuration, operational and communication status,
and diagnostic information from the WRS and RSX. The INFO command automatically executes the
following commands (one at a time in the order listed):
• PARAM WRS
• STATUS WRS
• COMM WRS
Revision Date: July 10, 2008
Siemens Building Technologies, Inc.
Figure 9. Example Results from the TEST Command.
Table 12. TEST Command Result Parameters.
For a TEST command result of 2340.591 1 12 0 1 -43 -41 -98
Seconds since last WRS reset
Message sequence number
Message reponse time (in milliseconds)
Number of MAC backoffs
Number of message attempts
WRS-to-RSX RSSI value
RSX-to-WRS RSSI value
Background RSSI value
Wireless Room Sensor Solution
Indicates
37