Furuno GP-37 Operator's Manual

DGPS NAVIGATOR GP-37
GPS NAVIGATOR GP-32
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.
Choosing Display Mode
Press the [DISP] key until desired display
appears.
20
10
30
[DISP] key
40
0
9.9
KT
SOG
0
60
[User Display: Speedometer]
(Display format
depends on user setting.)
[DISP] key
POWER(V) SOG(KT)
12.1 9.9
TRIP(NM) COG(°)
9.99 5.6
[User Display: Digital Data]
(Display format
depends on user setting.)
[DISP] key
D2D 02-FEB-02 15:37:40
34°44. 000'
N
135°21. 000'
E
[DISP] key
10.0 357°
CSE:
SOG: kt
[Nav Data Display]
Choosing Display Range
1. Press the [MENU] key.
2. Press the [ENT] key.
!
3. Press to increase;
4. Press the [ENT] key to close the window.
Operator's Guide
D2D
n
[ 5 ]
m
X
COG:
357°
SOG:
10.0 k t
34°44.000N 135°21.000E
[Plotter Display]
[DISP] key
004
242°
[+]
BRG
357°
COG
0.05 0.05
0.5
17.5
n
RNG
m
0.05
10.0 n
k
XTE
m
SOG t
[Highway Display]
[DISP] key
D2D MAG CURSOR 15:37
300 330 N E
30 60
°
10.0 357
kt
SOG: COG:
17.5 nm BRG:
RNG: 242°
1H30M 12:30
TTG: ETA:
[Steering Display]
"
to decrease.
Shifting the Cursor, Display
1. On the plotter display, press the cursor
pad to turn on the cursor. Use the cursor
pad to shift the cursor.
2. Place the cursor on an edge of the screen.
Use the cursor pad to shift the display.
Centering Own Position
1. Press the [MENU] key.
2. Choose "SHIP TO CENTER?".
3. Press the [ENT] key.
Entering MOB Mark
1. Press the [MARK/MOB] key several
seconds.
2. Choose YES.
3. Press the [ENT] key.