Table of Contents
Advertisement
9. OTHER FUNCTIONS
[DISPLAY FORMAT] menu: Page 1
[LANGUAGE]: Selects language to use.
[KEY BEEP]: Enables or disables the beep that sounds each time a key is operated.
[SPEED SENSOR]: Selects the source of speed data from [INTERNAL GPS], [NMEA
FOR SOG], [NMEA FOR STW] or [FISH FINDER]. For details, see the installation
manual.
[NMEA SHIP SPD OFFSET]: An offset may be applied to NMEA speed data ([NMEA
FOR SOG] or [NMEA FOR STW] at [SPEED SENSOR]). For details, see the installa-
tion manual.
[WATER TEMP. SENSOR]: Selects the source of water temperature data from
[NMEA] or [FISH FINDER]. For details, see the installation manual.
[NMEA WTR TEMP OFFSET]: An offset may be applied to NMEA water temperature
data. For details, see the installation manual.
[DEPTH SENSOR]: Selects the source of depth data from [NMEA] or [FISH FINDER].
For details, see the installation manual.
[NMEA DEPTH OFFSET]: An offset may be applied to NMEA depth data. For details,
see the installation manual.
[DRIFT AVERAGE TIME]: Sets the time to average drift.
[SELECT AUTOPILOT]: Selects the source of autopilot data from [NMEA0183],
[NMEA2000] or [AUTOMATIC]. For details, see the installation manual.
[SEL. BEARING SENSOR]: Selects the source of heading data from [NMEA0183],
[NMEA2000] or [AUTOMATIC]. For details, see the installation manual.
[HEADING OFFSET]: Sets the offset value to correct the NMEA heading data. For de-
tails, see the installation manual.
™
[SBAS SET BY SC]: Use or do not use SBAS by Satellite Compass
, connected via
NMEA2000. For details, see the installation manual.
[BEARING OFFSET]: Sets the offset value for heading.
9-9
Advertisement
Table of Contents
Troubleshooting
