Table of Contents
Advertisement
4. Select a serial port to display RX/TX sentences. To stop showing the sentences,
press the 0 key. The indication "PLAYING" at the top of the screen changes to
"TEMP STOP DISP". To re-display the sentences, press the 0 key.
To save the log data to a USB flash memory, go to step 5. Otherwise, go to step 9.
5. Connect a USB flash memory to the USB port (see section 10.3.1). The indication
"NO USB" at the top of the screen changes to "STOPPED SAVING".
6. Push the ENTER knob to save the log data. The indication "STOPPED SAVING"
at the top of the screen changes to "SAVING".
7. To complete the saving, push the ENTER knob. The indication "SAVING" at the
top of the screen changes to "STOPPED SAVING".
8. Remove the USB flash memory (see section 10.3.2).
9. Press the DISP key to close the menu.
Example: [1. SERIAL PORT1]
9. OTHER FUNCTIONS
9-25
Advertisement
Table of Contents
Troubleshooting
