How To Transfer The Data From The Usb Flash Memory - Furuno GP-3700F Operator's Manual

10. HOW TO RECORD, PLAY BACK DATA
6. Select [ADD] or [OVERWRITE] depending on the item selected at step 5.
[ADD]: Adds the selected data to the current display data.
[OVERWRITE]: Overwrites the current display data.
Note: When setting [RECORD MARK/TRACK] to [ADD], the selected data can
not be added if the memory capacity is reached (30,000). For [REC OWN TRK] or
[REC OTHR TRK], the oldest data is erased to make room for the latest. For ex-
ample, when 25,000 track points for own ship are added to the current 10,000
track points, the old 5,000 track points of the current 10,000 track points are
erased. Then 25,000 track points are added to the remaining 5,000 track points.
7. Repeat step 5 and step 6 to replay other data.
8. Select [SEL DATUM].
9. Select [WGS-84] or [TOKYO].
10. Select the file to replay from [DATA SELECTION]. The message "LOAD FILE.
ARE YOU SURE? (THE SYSTEM WILL REBOOT WHEN THE FILE IS LOAD-
ED.)" appears.
11. Select [RUN] to replay the data, which takes max. one minute. When the screen-
shot data is large, more time is necessary. For screenshot procedures, see
section 10.5.
12. Push the ENTER knob.
13. Press the DISP key to close the menu.
10.3.5

How to transfer the data from the USB flash memory

Data in the USB flash memory can be transferred to the internal memory.
1. Connect a USB flash memory in the USB drive.
2. Press the MENU key to open the main menu.
3. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
4. Select [5. TRF USB TO INT MEMORY].
10-8
20150101130027.csv
2000
20150101130028.csv 2150
2700
20150101130029.csv
1300 70 20
1500
1650
1350 85 22
1900 1800 135 27
3500/30000
700/10000
900/10000
800/10000
500/10000
2000/30000