Ais Target Data; How To Display The Individual Ais Target Data - Furuno GP-3700F Operator's Manual

12. AIS OPERATIONS
12.4

AIS Target Data

You can display the AIS target data.
12.4.1

How to display the individual AIS target data

Basic AIS target data
1. Press the CURSOR ON/OFF key to turn on the cursor.
2. Put the cursor on the target you wish to display its data to show the basic AIS tar-
get data.
Detailed AIS target data
1. Press the CURSOR ON/OFF key to turn on the cursor.
2. Put the cursor on the target you wish to display its data then push the ENTER
knob to show the detailed AIS target data.
3. Press the MENU or DISP key to close the window.
Note 1: You can display the detailed AIS target data from the AIS list (see
section 12.4.2).
Note 2: When pushing the ENTER knob while the detailed data is displayed, you can
activate or sleep the AIS target (see section 12.2).
12-4
"- -" is displayed for
the item without data.
"- -" is displayed for
the item without data.