How To Shift The Display - Furuno GP-3700F Operator's Manual

3. Select [2. NAVIGATOR SETUP].
[NAVIGATOR SETUP] menu: Page 1
4. Select [FREE UP ANGLE] on page 2.
5. Use the numeric keys to enter angle.
6. Press the DISP key to close the menu.
2.5

How to Shift the Display

The display can be shifted on the plotter display.
1. If the cursor is displayed, press the CURSOR ON/OFF key to turn off the cursor.
2. Operate the trackball. The display shifts in the direction in which the trackball is
rolled.
3. Press the CENTER key.
• In north up or specified direction up mode, own ship mark is returned to the cen-
ter of the screen.
• In head up, AC up, course up or goto up mode, own ship mark is shifted to a
position that is 1/3 the distance from the bottom to the top of the screen.
Note: When own ship reaches an edge of the screen, the own ship mark is automat-
ically shifted sternward so their is some distance between the bow of the mark and the
edge of the screen.
2. PLOTTER DISPLAY OVERVIEW
Press .
Press .
[NAVIGATOR SETUP] menu: Page 2
2-7