Table of Contents
Advertisement
19. Select [MOVE FORWARD] or [FIGURE-8 TURN].
[MOVE FORWARD]: Track is traced according to the course set.
[FIGURE-8 TURN]: Track is traced in figure-eight course.
20. Select [MODE INDICATOR].
21. Select one of the following:
[S: SIMULATOR]: Use the position data provided with the built-in simulator.
[A: NORMAL POSITIONING]: Use GPS position data.
[D: DGPS POSITIONING]: Use DGPS position data.
[E: DEAD RECKONING]: Use dead reckoning position data.
[M: ENTER MANUAL]: Use manually entered position, course, etc.
[N: NO POSITIONING]: Use no position data.
22. Press the DISP key to close the menu.
To stop the demo mode, select [T. POS.] at step 5.
Echo sounder
1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [7. DEMO MODE].
4. Select [FISH FINDER SIMULATION MODE].
5. Select [SIMULATED].
6. Press the DISP key to close the menu.
To stop the demo mode, select [REAL DISPLAY] at step 5.
1. OPERATIONAL OVERVIEW
1-15
Advertisement
Table of Contents
Troubleshooting
