How To Edit Waypoints - Furuno GP-3700F Operator's Manual

11. Select [TIME DIFFERENCE].
When selecting [TIME DIFFERENCE]
in [COORDINATE], [LANE 1] and
[LANE 2] are displayed here.
12. Select [LANE 1].
13. Press the numeric keys to enter the value for [LANE 1]. Enter the alphabet of the
lane by pressing applicable numeric key, referring to the following:
1 key: A
5 key: E
9 key: I
To set "1F: 22.01", for example, press the 1, 6, 2, 2, 0, 1 keys in order.
14. Select [LANE 2].
15. Press the numeric keys to enter the value for [LANE 2].
16. Follow the procedure from step 11 in section 5.1.3.
5.2

How to Edit Waypoints

You can edit waypoints from the waypoints list.
1. Press the MENU key to open the main menu.
2. Select [1. ROUTES/WAYPOINTS LIST].
3. Select [1. WAYPOINTS LIST].
4. Select the waypoint to edit. The [EDIT WPT NAME] window appears.
Note 1: Waypoints can be sorted by alphanumeric order, distance to own ship,
mark type, or registration order (see section 5.4).
Note 2: A waypoint's color or shape cannot be changed when its [INT. BAN] is
other than 0.00 NM.
Note 3: The color and shape of the last-edited waypoint will be used hereafter for
the waypoint entered at own ship position and cursor position.
5. Select the item to edit, then edit its attributes as required (see section 5.1.3).
6. Select [RUN] to show the following message.
7. Select [RUN].
8. Press the DISP key to close the menu.
2 key: B
6 key: F
0 key: J
WAYPOINT XXXXXX ALREADY EXISTS.
OVERWRITE?
RUN CANCEL
3 key: C 4 key: D
7 key: G 8 key: H
5. WAYPOINTS
5-7