How To Change Waypoint Mark Size; How To Mark Radar Target Position - Furuno GP-3700F Operator's Manual

5. WAYPOINTS
5.7

How to Change Waypoint Mark Size

You can change the size of all waypoints to small or large, or turn them off.
1. Press the MENU key to open the main menu.
2. Select [7. COAST LINE SETTING].
3. Select [1. COAST LINE DETAIL SETTING].
4. Select [DISPLAY WAYPOINT] on page 1.
5. Select [LARGE], [SMALL], or [HIDE].
[LARGE]: Waypoints are shown in actual mark shape.
[SMALL]: Waypoints are shown with an "x" regardless of mark shape selected.
[HIDE]: All waypoints are turned off except the waypoint destination and route.
6. Press the DISP key to close the menu.
5.8

How to Mark Radar Target Position

With connection of a radar that supports TLL (Target Latitude and Longitude), a radar
target's position can be output from the radar and marked on this plotter as the way-
point . For details, see the radar's operator's manual.
×
5-10