Furuno GP-3700F Operator's Manual page 40

2. PLOTTER DISPLAY OVERVIEW
amond. You can scale the diamond to match the size of your fishing net. The an-
gles for casting net is displayed at the top left of the screen. To change the size of
the diamond, see "How to change the size of the diamond cursor" on page 2-11.
How to disable unnecessary cursors
1. Press the MENU key to open the main menu.
2. Select [8. PLOTTER DISPLAY SETTING].
3. Select [4. SPECIAL CURSOR].
[SPECIAL CURSOR] menu: Page 1
4. Select [CURSOR DISPLAY METHOD] on page 1.
5. Select [CIRCLE], [PARALLEL], [DIAMOND] or [ALL]. Only the selected cursor is
made available when pressing the CURSOR SEL key. For example, when select-
ing [CIRCLE], the cursor configuration changes as follows:
Circle → Crossing line / cross-hair → Circle → ...
Select [ALL] to turn on all cursor configurations.
6. Press the DISP key to close the menu.
How to set the orientation method and the number of parallel index lines
1. Press the MENU key to open the main menu.
2. Select [8. PLOTTER DISPLAY SETTING].
3. Select [4. SPECIAL CURSOR].
4. Select [DIRECTION] in [PI LINE] on page 1.
5. Select the orientation method.
[STARBOARD]: Displays parallel index lines to starboard.
[PORT]: Displays parallel index lines to port.
[PORT AND STARBOARD]: Displays parallel index lines to port and starboard.
6. Select [NO. OF LINES] in [PI LINE] on page 1.
7. Select the number of parallel index lines.
8. Press the DISP key to close the menu.
Parallel index line cursor
Own ship
mark
[DIRECTION]: [STARBOARD],
[NO. OF LINES]: [TWO LINES]
2-10
Press .
Press .
[DIRECTION]: [PORT],
[NO. OF LINES]: [THREE LINES]
[SPECIAL CURSOR] menu: Page 2
[DIRECTION]: [PORT AND STARBOARD],
[NO. OF LINES]: [ONE LINE]