Adjustments; Choosing Position Data Source - Furuno GP-7000 Installation Manual

3. ADJUSTMENTS

This chapter shows you how to adjust your unit, from the menu. When choosing item or option
from the menu, you may use the [ENTER] knob or the CursorPad (
descriptions contained herein use the [ENTER] knob.
3.1

Choosing Position Data Source

If you intend to use a position data from a source other than the internal GPS receiver follow the
procedure below. Otherwise, go to paragraph 3.2.
1. Press the [MENU] key to show the menu bar.
Menu Bar
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the
[ENTER] knob.
GENERAL PLOTTER MAP
Menu bar
FIX
NAVIGATE
COMPASS
INPUT/OUTPUT
EXT NMEA
GPS SIMULATION
ECHO SOUNDER SIMULATION On
AIS SETUP
C-MAP WEATHER SERVICE
SYSTEM UPDATE
ADVANCED menu
ALARMS ADVANCED
9
). For sake of brevity the
INFO FIND