12.1 Overview
This chapter shows you how to configure static routes for your LTE Device.
The LTE Device usually uses the default gateway to route outbound traffic from computers on the LAN to
the Internet. To have the LTE Device send data to devices not reachable through the default gateway,
use static routes.
For example, the next figure shows a computer (A) connected to the LTE Device's LAN interface. The LTE
Device routes most traffic from A to the Internet through the LTE Device's default gateway (R1). You
create one static route to connect to services offered by your ISP behind router R2. You create another
static route to communicate with a separate network behind a router R3 connected to the LAN.
Figure 71 Example of Static Routing Topology
12.2 Static Route Screen
Click Configuration > Network > Routing > Static Route to open the Static Route screen.
LTE
LTE3302-M432 & LTE3312-M432 User's Guide
106
C
H A P T E R
Routing
12